No UK statute prescribes one standard certificate of analysis (CoA) for research materials. What your lab can require is set by your own quality system, your funder or sponsor, and the standards your methods follow, chiefly ISO/IEC 17025 and, for reference materials, ISO Guide 31. This guide sets out what a CoA for a research peptide should contain, how to check the laboratory behind it, and what the document cannot tell you.
TL;DR
- There is no single UK legal template for a research-material CoA. Your lab's quality procedures decide what you accept at goods-in.
- A credible, batch-specific CoA identifies the material and lot, the dates, the method, the results and the person who authorised the report.
- For identity and purity, look for the method named (for example HPLC, with mass confirmation) and the actual result, not just "pass".
- Where a CoA cites ISO/IEC 17025 accreditation, check the UKAS directory to confirm the specific test is within the scope.
- A CoA is evidence about a tested sample. It does not prove storage, shipping or that your vial came from the same lot unless identifiers match.
Table of Contents
- What a certificate of analysis is
- Does UK law prescribe a CoA format?
- What a CoA should contain
- Tests that should support identity and purity
- Checking the laboratory behind the certificate
- What a CoA cannot establish
- A goods-in procedure you can adopt
- Our perspective
- Sourcing research peptides with certificates
- FAQ
- Sources
What a certificate of analysis is
A certificate of analysis is a document issued for a specific batch of material. It records the tests carried out on a sample of that batch, the methods used and the results, usually against a stated specification. For a research peptide, that normally means appearance, identity and purity, often with the vial content in milligrams.
Its job in a laboratory is practical. It lets you decide whether a material is fit for the experiment before it enters your workflow, and it gives you a record to file against your own results. If you want a walk-through of the fields on a typical peptide certificate, our guide to reading a peptide certificate of analysis goes line by line.
Does UK law prescribe a CoA format?
For general research peptides, we are not aware of any UK law that fixes a mandatory CoA layout. The requirements you meet come from elsewhere:
- Your institution's quality system. Goods-in procedures, supplier approval and record keeping decide which documents you must hold.
- Accreditation requirements. A lab working to ISO/IEC 17025 has rules about the reports it issues and the services it buys.
- Funders, sponsors and journals. Many ask for evidence of the identity and purity of key reagents.
- Sector-specific regulation. Where UK law does require accredited analysis, it says so explicitly. The HSE's asbestos analysts' guide is an example: it states that only UKAS-accredited organisations may be used for certain activities where conformity with ISO 17020 or ISO 17025 is required. That rule belongs to asbestos work, not to research peptides, but it shows the pattern: where the law demands accredited testing, it names the standard.
The practical consequence is that "CoA requirements" for a UK research lab are mostly requirements you write yourself. A short, written acceptance specification for incoming peptides saves arguments later.
What a CoA should contain
Two published references give a solid baseline. The first is PD ISO Guide 31:2015 from BSI, which helps producers of reference materials prepare accompanying documentation. It sorts information into mandatory, recommended and other categories, so users can confirm a material's suitability. It is written for reference materials, but its logic transfers well to any material where you need to judge suitability from paperwork.
The second is the reporting logic of ISO/IEC 17025. A recent discussion of batch-specific versus generic certificates notes that the standard expects a report of results to include the identity of the item tested, relevant dates, the method used and the person authorising the report, and that a document missing these is not a proper test report.
Turning that into a checklist for a research peptide CoA:
| Element | What to look for | Why it matters |
|---|---|---|
| Supplier details | Company name and address | You know who stands behind the document |
| Material identity | Product name, sequence or structure reference, CAS number where one exists | Confirms what was tested |
| Lot or batch number | A specific number that matches the vial label | Links paper to physical material |
| Dates | Date of analysis, and ideally date of issue | Shows the data is current for that lot |
| Methods | Named technique, such as HPLC conditions or a method reference | Lets you judge whether the result means what you need |
| Results | Numerical purity (%), content (mg), appearance, identity result | A figure you can record, not just "conforms" |
| Specification | The limit each result is judged against | Shows what "pass" means |
| Authorisation | Name or signature of the person releasing the report | Accountability |
A document that gives a purity figure with no lot number, no date and no method is a marketing statement. A CoA that fills every row above is something you can file.
Tests that should support identity and purity
Purity and identity are different questions and need different evidence.
Purity. Reversed-phase HPLC with UV detection is the usual method for peptides. The reported percentage is the main-peak area as a share of total detected peak area under the conditions used. That is useful, but it is method-dependent: change the gradient, column or wavelength and the figure can move. Our guide to reading and judging an HPLC purity number explains how to read chromatograms and what the percentage does and does not cover. If you are weighing separation platforms, HPLC versus UPLC covers the differences.
Identity. Retention time alone shows the peak behaves like something, not that it is the right peptide. Mass spectrometry confirms the molecular mass against the expected value. We explain what it adds in our piece on LC-MS peptide analysis. For a CoA to support identity, look for a measured mass next to the theoretical one.
Content. Vial content in milligrams tells you how much material is present. It is not the same as purity, and a peptide can be highly pure yet contain a good deal of water and counter-ion by weight. If your experiments depend on exact molar amounts, ask whether the stated content is net peptide.
Anything else your work needs. Water content, residual solvents, counter-ion, endotoxin or sterility matter only if your application is sensitive to them. A pharmacopoeial peptide specification covers many such attributes, while a standard research certificate typically reports fewer. Decide which of these your protocol needs, and ask for them before you order.

For guidance on specifying what you need from analysis in the first place, the Eurachem/CITAC Guide to Quality in Analytical Chemistry is a good professional reference. It suggests an analytical requirement should address the information required, traceability, measurement uncertainty, method requirements, performance targets such as precision and limit of detection, and identification and QA/QC requirements.
Checking the laboratory behind the certificate
A certificate is only as credible as the lab that produced it. Three checks take minutes.
Is the lab accredited, and for what?
Many certificates state that the issuing laboratory is accredited to ISO/IEC 17025. In the UK, UKAS is the sole national accreditation body, as the HSE's analysts' guide states, and conformity with ISO 17025 is demonstrated by accreditation from a recognised body.
The point that catches people out is scope. A recent article in Laboratory Talk explains that accreditation means UKAS has assessed the lab as competent to perform specific tests, under a management system covering method validation, calibration, traceability and staff competence, and that what matters is whether the reported test appears in the lab's scope. UKAS publishes guidance noting that the Schedule of Accreditation is the definitive statement of a laboratory's accredited scope, to be viewed after confirming on the UKAS website that the lab is currently accredited. That guidance is written for calibration laboratories, but the principle applies equally to testing.
A logo on a certificate is not a scope check. Look up the lab, open its schedule, and confirm the technique and material type appear.

Is the report internally consistent?
Check that the lot number, product name and molecular details agree throughout. Check the analysis date falls after manufacture and before release. Check the stated mass matches the expected mass for the sequence. Inconsistencies are the quickest sign of a templated document.
Is it batch-specific?
A generic certificate describes a product type. A batch-specific one describes one lot. For anything you will publish, you want the second. If you need to reconcile this with your own re-testing, our guide to calibration peptides and system checks helps you set up in-house verification.
What a CoA cannot establish
A CoA is evidence about a sample, not a guarantee about every vial. It cannot, by itself, show:
- That the tested sample represents the whole lot. Sampling is a separate question from analysis.
- That storage and shipping were right afterwards. Accreditation speaks to how the lab tested what it received. As the Laboratory Talk piece notes, it does not show the lot was stored and shipped correctly or that your vial came from the same batch; those links rest on matching identifiers.
- Attributes that were not tested. A purity figure from HPLC says nothing about water, counter-ions, solvents, endotoxin or sterility unless those are reported. Absence of a result is not a pass.
- Regulatory approval or suitability for any use beyond research. A CoA is not a safety assessment. Research peptides are supplied for laboratory use only, a point we cover in what the research-use-only label means in the UK.
So the CoA starts your quality record rather than finishing it. After receipt, match the lot number on the vial to the certificate, log it, and store the material as the supplier directs. Our peptide handling guidelines cover storage and handling, and peptide stability testing covers how to confirm a material still meets spec after weeks in the freezer or after reconstitution. For the preparation step itself, see our laboratory guide to peptide reconstitution.
A goods-in procedure you can adopt
If your lab has no written rule, this sequence works for most research groups:
- Define the acceptance specification before ordering. State the minimum purity, the identity evidence (for example HPLC plus mass), and any extra tests your protocol needs.
- Request the batch-specific CoA with the quote or order. Do not wait until the vial is on the bench.
- Check the document against the table above. Reject or query anything missing a lot number, date, method or authorising person.
- Verify accreditation scope if it is claimed. Use the UKAS directory and read the schedule.
- Match physical to paper on arrival. The lot number on the vial must equal the lot on the certificate.
- File and link. Store the CoA with the lot number in your inventory record, and cite the lot in lab notebooks.
- Re-test when it matters. For critical or long-running work, run an in-house identity or purity check on receipt and again after storage.
This takes little time per order and turns a PDF into a traceable record.
Our perspective
We see the CoA as the first page of a lab's evidence, not a formality at the bottom of an order. Researchers rightly ask what was tested, by which method, on which lot, and who signed it off.
That is why we supply our research peptides with 99%+ HPLC purity and with Certificates of Analysis, backed by quality controls and verification processes designed to give laboratories a document they can actually use. We would rather you read the certificate closely than take our word for the number.
Our products are for laboratory and scientific research only, and everything we publish is written for the scientists, institutions and students who work that way.
Neil
Sourcing research peptides with certificates
If you are specifying peptides for a UK lab, we supply precision research peptides with 99%+ HPLC purity, detailed product certifications including Certificates of Analysis, and a secure checkout. Everything is supplied strictly for laboratory and scientific research, not for human or veterinary use.

Read how we define the research-use boundary on our research use only page, or browse the range from the BioForgeUK homepage.
FAQ
Is a CoA a legal requirement for research peptides in the UK?
We are not aware of a UK law that requires a particular CoA format for research peptides. In practice, your institution's quality system, your funder or your accreditation obligations usually require one. Check your own procedures and write the requirement into your purchasing specification.
What should a research peptide CoA include as a minimum?
Supplier details, the product name, a specific lot number, analysis dates, the named method, numerical results such as purity and content, the specification, and who authorised the report. ISO/IEC 17025 reporting expectations and ISO Guide 31 give a useful basis for this list.
Does ISO/IEC 17025 on a certificate mean every result is accredited?
No. Accreditation applies to the tests listed in the laboratory's scope. Look the lab up in the UKAS directory and confirm that the specific technique and material type appear in its schedule of accreditation.
Is HPLC purity enough to prove a peptide is right for my experiment?
It answers one question: the proportion of the main peak under the conditions used. Identity needs mass confirmation, and sensitive work may need water, counter-ion or endotoxin data. Decide what your protocol requires and request those results with the CoA.
Can a CoA replace my own checks on receipt?
No. A CoA describes a tested sample. Match the lot number to your vial, store it properly and consider in-house identity or purity checks for critical work.
Sources
- PD ISO Guide 31:2015, BSI Knowledge
- Batch-Specific vs Generic Certificates of Analysis for Research Peptides, Tekedia
- HSG248 Asbestos: The Analysts' Guide, HSE
- Guide to Quality in Analytical Chemistry, Eurachem/CITAC
- Certificates of analysis: are you reading or merely receiving your CoAs, Laboratory Talk
- LAB 45 Schedules of Accreditation for Calibration Laboratories, UKAS
