← Back to blog

Custom Peptide vs Catalogue: Which Suits Your Research?

November 15, 2026
Custom Peptide vs Catalogue: Which Suits Your Research?

If your experiment uses a published, well-characterised sequence, a catalogue peptide is usually the better choice: it is made, tested and documented before you order, so you can start work as soon as it arrives. Custom synthesis is a different project, built around a sequence or modification that does not exist as a stock item. This guide explains the difference, what to compare, and how to judge the paperwork in either case. At BioForgeUK we supply catalogue research peptides at 99%+ HPLC purity, with a Certificate of Analysis, for laboratory use only.

Bioforgeuk
Source Peptides for Research
Explore BioForgeUK's catalogue of high-purity research peptides, supplied for laboratory and scientific research rather than human consumption.
Visit

TL;DR

  • A catalogue peptide is a stock product with a defined sequence and existing analytical data. A custom peptide is made to your specification after you order.
  • Catalogue supply removes the synthesis wait from your timeline and gives you the batch data before you commit.
  • Whichever route you take, purity and identity are separate questions: HPLC measures purity, mass spectrometry confirms you have the right molecule.
  • Read the Certificate of Analysis for the batch you receive, not for the product in general.
  • BioForgeUK peptides are supplied strictly for laboratory and scientific research, not for human or veterinary use.

Table of Contents

What the two terms mean

A catalogue peptide (also called a stock or off-the-shelf peptide) is a sequence a supplier has already made, usually one that is widely published and used. The supplier lists it with a defined sequence, a stated purity and a batch record. You choose a product, a quantity and place an order.

A custom peptide is made to a sequence or specification you supply. That may be a novel sequence, a truncated or scrambled variant of a known one, a different length, or a version carrying labels or chemical modifications such as a fluorophore, biotin tag, phosphorylation or cyclisation. Nothing exists until your order triggers synthesis.

The practical difference is where the risk sits. With a catalogue product, the synthesis and first analysis are already done, and you assess the result. With a custom order, the synthesis happens on your timeline and you find out afterwards whether it worked as planned.

Catalogue and custom peptide route comparison

How peptides are made, and why it matters for the choice

Both routes rest on the same chemistry. The UK National Physical Laboratory describes making complex peptides by Fmoc/tBu solid-phase synthesis on microwave-assisted synthesizers, then purifying them and verifying the result with analytical reverse-phase HPLC and LC-MS. Peptides are built one amino acid at a time on a solid support, cleaved off, then purified.

Three consequences follow for your decision:

  1. Every coupling step can fail slightly. The longer the chain, the more deletion and truncation products accumulate, and the more purification has to remove. A sequence that has been made many times is a known quantity.
  2. Difficult sequences behave unpredictably. Hydrophobic stretches, repeated residues and sequences prone to aggregation can lower yield and make purification harder. A custom order for such a sequence may need optimisation.
  3. Purification decides the final number. The purity on the certificate is what is left after purification, so the method and the data behind it matter more than the headline figure.

Custom or catalogue: the comparison that matters

FactorCatalogue peptideCustom peptide
SequencePublished, defined, stock sequenceAny sequence you specify
Synthesis waitNone: already madeWeeks are typical for routine sequences, longer for difficult ones
Analytical dataBatch data exists before you orderGenerated after synthesis
ModificationsThose the product is listed withLabels, tags, cyclisation, non-natural residues
Cost certaintyFixed list price per productQuote per sequence, rising with length and complexity
ReorderingSame product codeSame specification, but a fresh synthesis each time
Best forReproducing or extending published workNovel sequences and bespoke constructs

One UK buyer's guide puts routine custom lead times at one to four weeks, with a routine 15-mer at above 95% purity often taking two to three weeks, and heavily modified or long sequences costing considerably more. Treat those as indicative: lead time and price depend on length, sequence and modification, so any quote should be read as specific to that order.

When a catalogue peptide is enough

For most experiments built on existing literature, catalogue supply fits better. Typical cases:

  • Replicating or building on published work. If a paper used a named, standard sequence, a catalogue product of the same sequence lets you compare like with like.
  • Assay development and controls. A defined, high-purity reference material is what you want in the first weeks of setting up a method.
  • Time-limited projects. Student projects, grant-funded work with fixed end dates and pilot studies cannot absorb a synthesis wait and the risk of a failed batch.
  • Repeat purchases. When consistency across batches matters, buying the same listed product with a batch certificate each time keeps the comparison simple.
  • Budget-constrained work. A fixed list price is easier to plan than a per-sequence quote.

Catalogue supply also lets you check the documentation before the peptide is in your hands, which leads to the question that matters most whichever route you take.

When custom synthesis is a different project

A custom order becomes relevant when your question cannot be answered with a stock sequence. That includes novel epitope work, alanine or truncation scanning, labelled peptides for binding or imaging assays, and constructs with non-natural amino acids. These are design-led projects: you specify the sequence, the modifications, the purity grade and the quantity, and the work is planned around that specification.

If that describes your study, it is worth settling the design before anything else. If your sequence is a standard published one, it is worth checking whether the stock product already does the job, because that is the quicker way to start. Our range at BioForgeUK covers catalogue research peptides only.

Purity and identity: two different tests

The most common mistake when comparing suppliers is treating "99% purity" as a complete description. It is not. As the UK help page of an analytical verification service explains, HPLC assesses chromatographic purity from relative UV-detectable peak areas, while LC-MS supplies molecular-mass evidence that the detected material is consistent with the expected peptide.

In plain terms:

  • HPLC tells you how much of the sample elutes as one main peak compared with everything else it detects. It is a purity measurement. Our guide to reading the HPLC purity number explains what the percentage does and does not capture.
  • LC-MS tells you the mass of what you have. If the measured mass matches the expected mass for your sequence, that supports identity. See how LC-MS peptide analysis works.

A peptide can be 99% pure by HPLC and still be the wrong peptide if the identity was never confirmed, and a correct peptide can be poorly pure. You need both numbers, and you need them for the batch in your vial.

Reading the chromatogram yourself

The certificate gives you a single percentage, but the trace behind it holds more. Look at the main peak's shape, the baseline, and any shoulders or small peaks near it. Our practical guide on how to interpret an HPLC chromatogram walks through what each feature suggests. If you are comparing methods, HPLC versus UPLC covers how resolution and run time differ.

What to check on any Certificate of Analysis

Whether the peptide is catalogue or custom, the certificate is your evidence. Check these points:

  1. Batch or lot number that matches the vial label.
  2. Sequence and molecular formula stated, with the expected mass.
  3. Purity by HPLC, with the method conditions and, ideally, the chromatogram.
  4. Mass spectrometry result showing the observed mass against the expected value.
  5. Date of analysis, so you know how recent the data is.
  6. Appearance and quantity as supplied.

Our article on reading a peptide Certificate of Analysis covers each line in more detail. For catalogue products, this is a real advantage: the data exists, so you can review it as part of the ordering decision rather than after a wait.

A worked example

Suppose a postgraduate team is setting up a binding assay using a sequence taken from a published paper, and plans three pilot runs over six weeks.

  • Catalogue route. They order the listed peptide, receive it with a Certificate of Analysis, check the batch number, the HPLC purity and the mass result, then reconstitute and begin. Synthesis time is not part of their schedule.
  • Custom route. They would specify the sequence, choose a purity grade, wait for synthesis and purification, then check the data on arrival. If the first batch fell short, a second synthesis would consume more of the six weeks.

For a published sequence and a fixed timetable, the catalogue route removes a variable. That is the situation most students and early-stage projects are in.

After the order: handling matters as much as supply

Whichever route you choose, the peptide's condition on arrival and at the bench affects your results. Packaging and cold-chain practice are covered in our guide to peptide packaging standards for UK research labs, and storage, weighing and aliquoting are covered in the peptide handling guidelines. When you are ready to dissolve the material, the laboratory guide to peptide reconstitution sets out a routine you can adapt.

Research use only: what it means for your order

Research peptides are supplied for laboratory and scientific work, not for human or veterinary consumption. That applies to catalogue and custom supply alike, and it is why a supplier should be clear about intended use at the point of sale. For a plain explanation of the label in a UK context, see our article on what research use only means. You can also read our research use only statement.

Where BioForgeUK fits

Where BioForgeUK fits

Our catalogue is built for laboratories that want a defined product and the evidence to go with it. Peptides are supplied at 99%+ HPLC purity, backed by quality controls, verification technology and a Certificate of Analysis, with a secure checkout. All products are for laboratory and scientific research only.

If your work uses an established sequence, you can browse the range, check the documentation and order in one step from bioforgeuk.co.uk. You can also see what your paperwork will look like in our receipt preview.

Bioforgeuk

Institutions and laboratories that need detailed product certification will find that each product comes with the analytical documentation described above, so your quality file can be completed at the point of purchase.

Our view

Most of the questions we see framed as "custom or catalogue" are really questions about risk and time. A researcher with a published sequence and a deadline wants the shortest route to a peptide they can trust.

That is why we put our effort into the catalogue: 99%+ HPLC purity, verification processes and a Certificate of Analysis that you can read before you rely on the material. Purity is a number, but trust comes from the data behind it.

Our advice is to start from the evidence. Check the batch, the HPLC result and the identity confirmation, and judge the supplier by how openly they present them. A well-documented catalogue peptide gives your experiment a firm starting point, and that is what we set out to provide.

Neil

FAQ

Is a catalogue peptide lower quality than a custom one?

No. Quality depends on the synthesis, the purification and the analysis, not on whether the product is in a catalogue. A catalogue peptide at 99%+ HPLC purity with identity confirmed by mass spectrometry is well documented. Judge each batch by its Certificate of Analysis.

Does a higher purity percentage always mean a better peptide?

Not on its own. HPLC purity measures the relative UV-detectable peak area, and it says nothing about identity, which needs mass-spectrometry evidence. Look at the purity figure, the observed mass and the chromatogram together, for the batch you receive.

Do I need a Certificate of Analysis for a research peptide?

Yes, for any work you intend to reproduce or publish. It records the batch, the purity method and the identity result, which you can cite in your lab records. Our guide on reading a Certificate of Analysis lists the fields to check.

Can research peptides be used outside the laboratory?

No. Our peptides are supplied strictly for laboratory and scientific research, and are not for human or veterinary consumption. Anyone needing advice about medicines or health should speak to a doctor or pharmacist.

Sources